PFL series vertical compound sand maker_Sand making machine equipment-HENAN TALUS-Zhengzhou Changli Heavy Industry Technology Co. , Ltd.

Equipment Introduction

The compound sand maker (compound sand crusher) is a new product that has been optimized and designed by our company, combining domestic and foreign fine crushing technology. It has significant performance advantages and is used for crushing and processing hard materials such as shale, glass, ceramics, bluestone, metal ore, etc. It is suitable for materials with a compressive strength of less than 140 MPa and a humidity of no more than 15%. This equipment is widely used in mining, metallurgy, wear-resistant materials, cement, coal, glass, ceramics, electric power, and other industries.

The main features of the compound sand maker are:
① Large crushing ratio: It has high production, 1.4 times higher than similar domestic products.
② Energy-saving: It is designed to be energy-efficient, reducing power consumption.
③ Wear-resistant parts: The wearing parts are made of high hardness, high toughness, and multi-alloy materials, improving the service life by 2-3 times.
④ Adjustable clearance: The clearance between the hammer and impact plate is adjustable, allowing it to meet various fineness requirements.

High throughput

High crushing ratio

High sand making efficiency

Good granularity of finished product

Low energy consumption

Safety and stability

Product Performance

High wear resistance and easy adjustment of wearing parts

The PFL series compound sand maker has a larger feeding size of up to 240 mm and a finished discharge size of <3mm. It also has a large crushing ratio, with a primary yield as high as 70% -90%.

Vertical crushing cavity with high throughput

The vertical crushing cavity without partition or grate allows for smooth feeding and vertical crushing, resulting in high throughput, fast passing rate, high production, and relatively lower energy consumption.

Unique thrower plate structure reduces the cost of use

The unique thrower plate structure reduces the cost of use. The thrower hammer head and thrower liner are distributed in a cross pattern around the circumference in the feed tray. When the thrower hammer head is worn out, it can be used as a thrower liner, improving material utilization and reducing operating costs.

It is designed to allow for the crushing of high-temperature materials with its special water-cooled structure

It can crush high-temperature materials below 150°C, and its high-temperature bearings can withstand high-temperature lubricating grease above 260°C.

High efficiency, energy-saving and smooth operation

The equipment has two structural forms: upper transmission and lower transmission. When matched with a mill, it can increase the mill's output by about 40% and reduce the system's power consumption by about 30%. The equipment runs smoothly with low noise, low vibration, good sealing, easy operation, installation, maintenance, and covers a small area.

Special rotor structure for enhanced equipment performance

The optimized design of the rotor forms a multi-stage continuous crushing cavity, utilizing energy and space efficiently, and improving the machine’s performance.

The chassis is equipped with protective plates, allowing it to crush materials with high hardness and abrasion

For materials with high hardness and abrasion (quartz stone, silica, river pebbles, and highly abrasive dolomite), the chassis can be optionally fitted with protective plates to avoid abrasion of the chassis body.

Technical Parameter

Multiple types are available, ensuring that there is always a suitable one for you.

Model	Feeding size(mm)	Discharging size(mm)	Power (kW)
PFL-750lll	<100	<3	45
PFL-1000lll	<120	<3	55
PFL-1250lll	<150	<3	90
PFL-1500lll	<180	<3	132
PFL-1750lll	<200	<3	160
PFL-2000lll	<220	<3	200
PFL-2300lll	<240	<3	250

Products Structure

From exterior design to internal structure, every detail has been meticulously considered and thoroughly tested.

Please kindly submit your request for a comprehensive product offer